Many gamers have seen the YLOD or the yellow light of death in their PS3s firsthand. This is also known as the red light of death or blinking red light because after turning the PS3 on, the green light will become yellow then it will turn red and will blink continuously. When the YLOD appears in your console, it won’t take long for it to become unusable. You may find many possible reasons on why it happened. Nonetheless, PS3 experts stated two main causes.
Hardware Damage Within the Console
To be able to connect the GPU and other components to the motherboard, they should be soldered. If the PS3 has been functioning for many hours, it’s likely for the solders or the hardware to overheat. Solders can melt in continuous high temperatures, and they’ll solidify again when the heat is gone. This melting and re-solidification of the solders causes the hardware to break off from the motherboard. And this will lead to yellow light of death more often than not.
There is not Enough Supply of Power
Capacitors or diodes cannot resist too much heat, which is the reason why they malfunction in hot temperatures. Basically, the console is not getting adequate power voltage to function. Nonetheless most experts claim that PS3 YLOD won’t happen that much with this reason. Taking into consideration the negative impact of overheating to the console, every PS3 owner is advised to ensure that their console is well ventilated while being used.
Ruling Out the Cause of Yellow Light of Death
There are ways to figure out whether a faulty power source or a damaged internal hardware is causing the YLOD. Switch on the console and listen for the sound of the fan in the console. Make sure that the console has cool down before switching it on, otherwise assessment will be hard. It certainly is a defective power supply if no sound of a running fan is heard from the inside. On the reverse side, if the fan ran but just stopped after a couple of minutes, then the cause is a malfunctioning motherboard.
What to do Once YLOD Showed Up
Almost all PS3 owners would simply dispose their damaged console and obtain a brand new one, a few would send them back to Sony for a repair. Then again, obtaining a new one will take a chunk off your wallet. The PS3 YLOD repair that is provided by Sony doesn’t come cheap either because besides the repair cost itself, people also need to pay for the shipment charge. It will also take three weeks to repair the PS3, and it can extend as much as 6 weeks if the damage is really severe. But when money is not the problem, then these solutions are really great.
Owners, however, can quickly perform the repairs by themselves. Individuals who decide to keep their current console and currently in a tight budget will certainly find this option helpful. It will just take an hour or two to accomplish the DIY PS3 YLOD repair. There is a repair guide available for download, which was made by a PS3 repairmen suitable even to people who are not technical experts. There are pics in each and every step so it won’t be difficult for you to follow. With it, PS3 blinking red light is resolved properly at a fraction of the cost and time.Basics and specifics are being discussed in this article. You might have seen various useful tips, but actually this is still the first part. Obviously, you will need to use this helpful info you’ve obtained in order to really make it useful. When you need more tips regarding PS3 Yellow Light Of Death , then visit ps3repair-guides.com. This article is copyright protected.