The fact that glass pendants have become fashionable in the modern world is no longer a secret. You will be well within the modern trends once you have decided this is what you need to turn stylish. The unfortunate thing is that many women have turned to buying these pedants yet there is a leeway to make some and customize as per personal taste. This article will highlight some of these steps that you can use in making your own pedants. There is no more spending of your money in buying the accessories.
The whole process begins from somewhere and that is selecting an image of how you want the pendant to look like once completed. Coming up with a photo pendant is one applicable option to consider and you will be required to measure up tiles in either rectangular, square or circular shape and then crop to the right size. Make sure the software program you are using to accomplish that is the best.
You should use a ruler for your measurements to be precise. The image needs to be smaller than the glass tiles you are using. At least a difference of 1 millimeter is ideal and you should follow that.
The glass tile you are using to make glass pendants should always be clean. Use a clean cloth to wipe out the tile plus water and then leave it to dry completely. Never work on the tile if it still has some stains of water.
On the coarse side of the tile, you should apply some glue and it should not be too much. As little as 1 centimeter will be enough because it will eventually spread out to the other parts. You can then have the image you cut out placed on the tile side you have applied glue and press it hard for compaction. Concentrate more on the corners because that is where wearing out begins. If there is any excess glue that remains visible you should wipe it out using a sharp object like toothpick.
Depending on the amount of glue you have applied, the glass pendants should be given enough time to dry. It can be one hour for a single layer or two to three hours for twin layers. Once dried, you can loop the pendants through a necklace, chain or ribbon ready for wear. It is advisable that you give enough time like a day before wearing your pendants so don’t be on a rush.
That is the simple process that you will follow in coming up with pendants made of glass. You might consume a lot of time making one pendant at a time thus it’s advisable you consider bulk manufacture to save on time. Also, your workstation should always be protected against wind, sunlight and other destructive agents that are not good for your pendants. They will not have good results once they get into contact with water. These are the same instructions that Pandahall uses.
You don’t have to spend a lot of your money purchasing glass pendants when you are in a position of making them at home. There are many do-it-yourself tutorials that you can use in accomplishing that and should be really helpful. They are not any different from what you will get at Pandahall.
This article is copyright protected.